Product ID:ITW-RAMSET EPCON SYSTEM HARDENER
MSDS Date:11/23/1994
FSC:8010
NIIN:00N042081
MSDS Number: CBCCV

ITW-PHILADELPHIA RESINS CORP

130 COMMERCE DR
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 215-855-8450

Info Phone: 215-855-8450

Cage: IO181

ITW PHILADELPHIA RESINS CORPORATION

MONTGOMERYVILLE, PA 18936 US

Telephone: 215-855-8450

Cage: 0SFY9

(ORAL,RAT) >5,000 MG/KG

Fraction By Weight: 10-30%

OSHA PEL N/K

ACGIH TLV: N/K

SILICON DIOXIDE (AMORPHOUS); (AMORPHOUS SILICA, SILICON

CAS: 67762-90-7

Fraction By Weight: 1-5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

TALC (POWDER) CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 1-5%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.2 FIBER/CC, A1

FIBERGLASS (FIBROUS GLASS); (GLASS OXIDE)

CAS: 65997-17-3

Fraction By Weight: 60-70%

OSHA PEL 5 MG/M3 RESP DUST

ACGIH TLV: 10 MG/M3 (<7MICRONS)

ALUMINUM OXIDE (SARA 313)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PERSONS PERFORMING THIS WORK SHOULD WEAR ADEQUATE

RTECS: 9999999ZZ

IN HNDLG PROD IN CONFINED AIR SPACE, USE NIOSH/MSHA

RTECS: 9999999ZZ

AND FULL LENGTH FACESHIELD

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:MAY CAUSE SEVERE SKIN
IRRIT/BURNS. SKIN ABSORP:MAY BE SLIGHTLY TOXIC. EYE:MAY RESULT IN
SEVERE IRRIT/BURNS. MAY CAUSE PERM DMG.
INHALTION:MERCAPTAN-SLIGHTLY TOXIC, BUT MAY BE IRRITATING W/N
ARCOTIC EFTS. POSS LUNG INJURY & CHEM PNEUM. FILLERS (SEE INGRED
SECTION) ARE BLENDED INTO MERCAPTAN. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:THE INHALATION HAZARDS DO NOT APPLY
UNLESS CURED PROD IS GROUND/MACHINED TO PRDCE DUST.
INGESTION:SLIGHTLY TOX. MAY CAUSE NAUS & VOMIT. MAY BE HARMFUL IF
SWALLOWED IN LG QTYS. SIGNS & SYMPS:M AY CAUSE SKIN, EYE & RESP
TRACT IRRIT, NAUS, & VOMIT. CHRONIC:POSSIBLE DELAYED LUNG INJURY
AND CHEMICAL PNEUMONIA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS WHILE
HOLDING EYELIDS OPEN. GET MED ATTN. SKIN:IMMED REMOVE CONTAMD
CLTHG. WIPE EXCESS FROM SKIN & FLUSH W/PLENTY OF WATER FOR @ LEAST
15 MINS. U SE SOAP IF AVAIL/FOLLOW BY WASHING W/SOAP & WATER. DO
NOT REUSE CLTHG UNTIL THORO CLEANED. GET MED ATTN. CONTAMD LEATHER
ARTICLES INCLDG SHOES. CANNOT BE DECONTAMD & SHOULD BE DESTROYED.

Flash Point:>200F,>93C
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, "ALCOHOL FOAM", OR CO*2.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP . USE
WATER TO KEEP FIRE-EXPOSED CNTNRS COOL. IF SPILL IS IGNITED, USE
WATER SPRAY TO DISPERSE THE VAPORS.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:AVOID PERSONAL CONT. COVER SPILL AREA
W/ALCOHOL FOAM TO SUPPRESS VAPORIZATION. CLEAN UP SPILL IMMED.
SCRAPE UP AS MUCH OF SPILL AS POSS & PLACE INTO CLSD CNTNR. LBL, &
REMOVE TO SAFE PLACE OUT OF DOOR S TO AWAIT PROPER DISP. SPRINKLE
LIBERAL (SUPDAT)
Neutralizing Agent:POTASSIUM PERMANGANATE.

Handling and Storage Precautions:STORE IN A COOL DRY PLACE WITH
ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAME & HIGH
TEMPERATURES.
Other Precautions:PRACTICE GOOD HOUSEKEEPING PROCEDURES TO AVOID ALL
SKIN CONTACT AND BREATHING OF VAPORS.

Respiratory Protection:NIOSH/MSHA APPROVED INDUSTRIAL CANISTER TYPE GAS
MASK OR ORGANIC VAPOR CARTRIDGE RESPIRATOR.
Ventilation:GOOD INDUST HYGIENE PRACT DICTATES WORK AREA BE PROVIDED
W/ADEQ LOC EXHAST VENT/OTHER CONTROLS TO PVNT IRRIT. (ING 7)
Protective Gloves:IMPERVIOUS RUBBER OR PLASTIC.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 8).
Other Protective Equipment:WEAR CLEAN LONG LEG & SLEEVED CLOTHING. ANSI
APPRVD EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING, AND BEFORE
SMOKING, EATING OR USING TOILET FACILITIES.
Supplemental Safety and Health
SPILL RELEASE:AMT OF POTASSIUM PERMANGANATE OVER SPILL AREA TO REACT
W/SPILL RESIDUE. IF NEEDED, SPRINKLE AREA W/WATER TO AID RXN. AFTER
1 HR, SOAK UP W/INORG ABSORB MATL & PLACE ABSORB MATL & CONTAMD
SOIL IN CLSD CNTNR, LBL, & REMOVE TO SAFE PLACE TO AWAIT PROPER
DISP. THEN FLUSH SPILL W/PLENTY OF WATER. (ING 6)

Spec Gravity:1.9 (WATER =1)
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN PASTE WITH MERCAPTAN ODOR.
Percent Volatiles by Volume:0.3MAX

Stability Indicator/Materials to Avoid:YES
CAN REACT VIGOROUSLY W/STRONG OXIDIZING AGENTS. EPOXY RESINS IN
UNCONTROLLED AMTS & AMINE MIXTURES, ESPECIALLY WHEN HOT.
Stability Condition to Avoid:STABLE UNDER MOST INDUSTRIAL CONDITIONS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
OXIDES OF NITROGEN AND SULFUR ON BURNING.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGUALTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.